The LCD Programmer Features:(available on all models)

* Backlit LCD display unique only to JAWO

* 3 modes of heat – comfort, economy, frost protection

* 24hr 365 day settings

* Keypad childlock, boost settings, holiday periods

* Accurate room monitoring sensor without radio waves

* Energy consumed indicater

Our new LCD control is at present the most comfortable and efficient control of your electric heating. It enables a fully automatic operation of your JAWO heating. The integrated electronics with built-in LCD display make it possible to define a customized heating profile with individual time intervals for every day of the week (24h per day, 7 days a week). For each day, three different temperatures can be programmed. The menu navigation is easy to understand and clearly visible on a large backlit display. With our technology, you do not need to train the control system nor worry about radio waves, as is the case with programmable radio technology. Another great advantage is the cycle time of the control. The JAWO heater stops its power consumption at a certain point and feels its way towards the desired temperature, guided by a temperature sensor placed at the bottom of the heater. This process is supported by a steady heat emission from the KOALIT heat storage core. Thus, the exact desired temperature is reached and an overheating of rooms is prevented. This is just another contribution from JAWO to the reduction of heating expenses. Only the absolutely necessary amount of electricity needed to reach the desired room temperature is consumed and nothing more.

  The Manual Thermostat

 * Simple to use manual controls

 * Power on and power consumed indicator

 * Can be intergrated into existing central heating system

 * Frost protection facility

 * Can be used with motion and absence detectors for energy saving

  Room temperature sensor

This temperature sensor is located on the bottom of every radiator. It monitors the room every 15 seconds and sends a signal that the room requires heat or it is hot enough. The mounting of this device on the bottom of the radiator is very important. It is constantly monitoring the air changes in the room. So as cold air is sucked natually into the warm radiator and circulates out hot, this cycle continues until the cold air is now at adequate room temperature.